No results found.
    Navigation

    Base de connaissances

    4 - IP Binding (Optional)

    Go to IP > Hotspot > IP Bindings. IP-Binding allows to setup static One-to-One NAT translations, allows to bypass specific HotSpot clients without any authentication, and also allows to block particular hosts and subnets from HotSpot network. To authenticate Subscribers only within the Hotspot network.

    1. MAC Address should be default
    2. Add the Hotspot network address on the address box
    3. Set server = all
    4. Set type = regular

    To bypass specific subnet (Management IPs)

    1. MAC Address should be default
    2. Add the network address on the address box
    3. Set server = all
    4. Set type = bypassed

    To block unwanted hosts/subnets from HotSpot network (Eliminating Unwanted Traffic)

    1. Add the MAC address of device (optional)
    2. Add a quad-zero route with a /0 subnet in the Address line
    3. Set server = all
    4. Set type = blocked
    • 0 Utilisateurs l'ont trouvée utile

    Cette réponse était-elle pertinente?

    Articles connexes

    1 - Setup Hotspot

    To setup your Hotspot, go to (1) IP > (2) Hotspot > (3) Servers > (4) Hotspot Setup...

    2 - Server Profile

    Go to IP > Hotspot > Server Profiles tab.Edit the server profile created in the last step...

    3 - User Profiles

    Go to IP > Hotspot > User Profiles Double-click the default user profile If the...

    5 - Walled Garden IP List

    Go to IP > Hotspot > Walled Garden IP List tab. This section configures the Mikrotik to...

    6 - Queues

    Go to Queues (left menu) Select the Queue Types tab, and then double-click the default-small...